Is Beverly Hills tap water safe? Water quality by ZIP
Beverly Hills ZIPs typically map to the city water department. Educational reports only — not medical advice.
Worried about your water in Beverly Hills? Get a free filter quote from a local installer.
Get a free filter quoteAbout 5 ZIP codes in our index are labeled Beverly Hills (Los Angeles County). Pick an example below or enter your own ZIP.
Example ZIPs in Beverly Hills
Utilities often matched near Beverly Hills
Names come from public CA water-system records for ZIPs labeled Beverly Hills. Your block may differ — always open the ZIP report.
- Beverly Hills-City, Water Dept.
The Beverly Hills water utility
Tap water in Beverly Hills comes from the City of Beverly Hills Public Works water utility (state system CA1910156). Its distribution system also covers part of West Hollywood. The City's 2025 Water Quality Report, filed with the State Water Board and posted at beverlyhills.org, says it met all drinking water standards in 2025 with no MCL violations.
Local groundwater plus imported water
Beverly Hills draws on two main supplies:
- Local groundwater from seven City wells in the Hollywood Basin and Central Basin. It is treated at the City's Foothill Water Treatment Plant, where treatment includes reverse osmosis to remove contaminants and natural minerals.
- Imported surface water from Metropolitan Water District. State Water Project water is filtered at MWD's Jensen plant in Granada Hills, and Colorado River water at the Weymouth plant in La Verne.
The City is expanding its local supply:
- The new Le Doux and Gregory Way wells near La Cienega Park are expected to yield up to 450 acre-feet a year. Construction to equip them is expected to begin in 2027.
- Hollywood Basin Well 5 is being rehabilitated.
- About 2.5 miles of aging water mains are in design for replacement.
2025 water quality by source
| Measure | Foothill plant (local) | Jensen (SWP) | Weymouth (Colorado) |
|---|---|---|---|
| Arsenic (MCL 10 µg/L) | ND–0.85 µg/L | ND | ND |
| Chromium 6 (MCL 10 µg/L) | 0.16 µg/L | ND | ND |
| Nitrate as N (MCL 10 mg/L) | 0.36 mg/L | ND | ND |
| Hardness | 145 mg/L | 140 mg/L | 234 mg/L |
| Total dissolved solids | 366 mg/L | 297 mg/L | 536 mg/L |
| Sodium | 80 mg/L | 48 mg/L | 89 mg/L |
| Sulfate | 46 mg/L | 71 mg/L | 176 mg/L |
| PFAS (all compounds listed) | ND | ND | ND |
Source: City of Beverly Hills 2025 Water Quality Report, treatment plant effluent tables.
Distribution system (Beverly Hills and part of West Hollywood): The highest locational running average was 26 µg/L for trihalomethanes (range 11–37, limit 80) and 8 µg/L for haloacetic acids (limit 60). Chlorine residual averaged 1.8 mg/L, and fluoride averaged 0.6 mg/L. The highest monthly share of coliform-positive samples was 1.15 percent, under the 5 percent standard, with zero E. coli. NDMA, a chloramination byproduct, was 2.1 ppt in Jensen water, below the 10 ppt notification level.
PFAS
The 2025 tables list more than two dozen PFAS compounds, including PFOA, PFOS, PFHxS, PFNA and GenX. Every one was non-detect at the Foothill plant and at both MWD plants, at reporting limits of about 2 ppt for most compounds. The City says it started PFAS monitoring before federal standards existed and retests as more sensitive methods arrive. It also says that MWD once detected PFAS in a single well within its regional system and notified member agencies. A very small portion of that water was blended into the Beverly Hills supply, and no extra public notice was required. See our PFAS guide.
Chromium 6, arsenic and nitrate
These common California groundwater concerns are all low in Beverly Hills. Foothill plant water had chromium 6 at 0.16 µg/L, arsenic no higher than 0.85 µg/L and nitrate at 0.36 mg/L, each a small fraction of its limit. The City says the plant's treatment, including reverse osmosis, removes contaminants and naturally occurring minerals. See our guides on chromium 6, arsenic and nitrate.
Hardness
The City's Q&A puts average hardness at 81 to 153 mg/L, or 4.7 to 8.9 grains per gallon, which is moderately hard. Colorado River water from Weymouth is harder, at 234 mg/L, so hardness can rise when more of that supply is delivered. The City suggests a dishwasher rinse aid for spots and a 1:1 vinegar cleaning cycle for kettles and coffee makers. See our hard water guide.
Lead and service lines
Beverly Hills reports no lead service lines and no galvanized lines requiring replacement, including privately owned lines. As of 2025 it had physically inspected 1,651 service lines, all verified non-lead, using a state-approved statistical method. At 33 homes sampled in 2024, the lead 90th percentile was 0.72 ppb (action level 15) and copper was 240 ppb, with no home over either action level. The City also sampled all five Beverly Hills Unified schools for lead in 2016.
Taste, odor and appearance
The City disinfects with chloramine, which can leave a faint chlorine taste. Letting water sit in an open pitcher and then chilling it helps, as does an NSF/ANSI 42 carbon filter (chlorine taste guide). Chloramine must be removed for aquariums and kidney dialysis. A "rotten egg" smell at a bathroom sink usually comes from bacteria in the drain, not the water. Milky water is usually trapped air.
Testing in Beverly Hills
- Older homes with original fixtures can test for lead at the tap through a lab in the State Water Board's ELAP directory.
- Hardness strips help you decide whether you need scale control.
Compare ZIPs in the free 90210 ZIP report or use the form below.
FAQ
Who supplies water in Beverly Hills?
The City of Beverly Hills Public Works water utility. Its distribution system serves Beverly Hills and part of West Hollywood.
Where does Beverly Hills water come from?
From local groundwater and imported water. The groundwater comes from seven City wells in the Hollywood and Central basins and is treated at the Foothill Water Treatment Plant, which includes reverse osmosis. The imported water is Metropolitan Water District supply from the State Water Project, treated at the Jensen plant, and the Colorado River, treated at the Weymouth plant.
Is there PFAS in Beverly Hills water?
Every PFAS compound listed in the 2025 tables was non-detect at the Foothill plant and at MWD's Jensen and Weymouth plants. The City notes that MWD once detected PFAS in a single well in its regional system and that a very small portion of that water was blended into the Beverly Hills supply.
Is Beverly Hills water hard?
Moderately. The City's Q&A gives typical hardness of 81 to 153 mg/L, or 4.7 to 8.9 grains per gallon. In the 2025 table, Foothill plant water measured 145 mg/L and Colorado River water from Weymouth 234 mg/L.
Does Beverly Hills have lead service lines?
No. The City inspected 1,651 service lines and verified all of them as non-lead, including customer-owned lines. The 2024 lead 90th percentile was 0.72 ppb across 33 homes.
Why does my water sometimes look milky?
Usually because of tiny air bubbles. A glass of it should clear from the bottom up within a few minutes. If water is discolored, the City suggests running the cold taps to clear it.
Want the full drinking water report?
Open a ZIP report for curated detections vs EPA limits and CA health guidelines. Open report for 90209 →
All cities · Los Angeles metro · All regions · Contaminant glossary · Methodology
Water guides: All guides · Hard water · PFAS · Chromium 6 · Nitrate · Arsenic · Chlorine taste
Nearby LA County guides: Los Angeles · Santa Monica · Glendale · Burbank · Los Angeles region
Worried about your water in Beverly Hills? Get a free filter quote from a local installer.
Get a free filter quote